If your Laview camera blinking blue light issue interrupts something, consider it a connectivity or pairing problem. This error typically occurs when the camera cannot properly connect to either your Wi-Fi or NVR. Don't go into a panic just yet. Try the following easy troubleshooting steps.

First, see to it that your Wi-Fi is stable and that your camera is within range. Restart both your router and camera so that the connections can be refreshed. Continue to see the light blinking; remove the device from the Laview app and add it again, check for available firmware updates, and perform one if needed. These updates usually fix hidden bugs.

Also, you may have an issue with the NVR system. You should factory reset Laview NVR to restore the default settings and remove any configuration errors. After the reset, just run through the setup again for your NVR and cameras. Getting back up any important settings before resetting is always a good idea. 

If the blue light appears again after all these fixes, try resetting the camera. Press and hold down the reset button for 10 to 15 seconds until the light flashes with a different color, and then set it up again via the Laview app. 

Following these steps will enable you to fix the Laview camera blinking blue light error in no time, thus resulting in smooth video surveillance and secure monitoring.