It's not as hard as you would think to set up your Canon Pixma TR4700 WiFi. Having a wireless connection for your printer saves you time and trouble, whether you're managing papers at the office or working from home. Here's a quick tutorial to help you set up your Canon printer's wifi using iJ Start Canon.
1. Turn on and prepare
Be sure you connect in and turn on your Canon Pixma TR4700 printer. When the WiFi indicator is ready to connect, it should be flashing.
2. press the Setup button.
Holding down the WiFi button will cause the power light to flash. Your printer will enter wireless setup mode as a result.
3. Launch the IJ Start Canon
Open a browser on your PC or mobile device, then navigate to https://ij.start.canon.
This is the official website that makes it simple to set up your printer. Out of the selections, choose Canon Pixma TR4700 Wifi Setup.
4. Pick Your Network
From the list of possible connections, the portal will assist you in selecting your WiFi network. Carefully choose your network name (SSID) and type your password. Verify that there are no errors or unnecessary spaces.
5. Connect and Verify
Click "Connect" after entering your WiFi credentials correctly. At this point, the printer will try to connect to the network. A confirmation message confirming the successful wifi configuration of the Canon printer will appear in a few moments.
6. Install any necessary drivers.
Download the software and drivers from the iJ Start Canon website if your device isn't able to recognize the printer on its own.
Advice:
Make that the router is operational and that there is a good signal where the printer is located.
During the setup procedure, turn off any VPN to improve connection speed.
Regularly check for software updates to keep the firmware on your printer up to date.
Your Canon Pixma TR4700 Wifi Setup is finished with this easy step. Cables no longer stand in the way of your ability to print, scan, and copy.
To know more about canon printer wifi setup visit our webpage.
